Bruker DPP1 - Special Safety Symbols; Intended Use; Contact for Technical Assistance

Intended Use
Technical Manual Version 001 BRUKER BIOSPIN 7 (55)
Special Safety Symbols 1.3.1
These symbols are used on the equipment and/or throughout this manual. They
alert to danger and important information:
There are various information notices used in this manual. These notices highlight
important information or warn the user of a potentially dangerous situation.
Intended Use 1.4
The DPP1 is to be used only in a PCI environment and with Bruker AVANCE III
spectrometers for the modification of data streams sent by the gradient controller.
The board is not intended for use outside of these standard parameters.
Contact for Technical Assistance 1.5
For further technical assistance on the DPP1, please do not hesitate to contact
your nearest BRUKER dealer or contact us directly at:
BRUKER BioSpin GMBH
am Silberstreifen
D-76287 Rheinstetten
Germany
Phone: + 49 721 5161 0
FAX: + 49 721 5171 01
E-mail: service@bruker.de
Internet: www.bruker.com
WARNING!
This symbol denotes hints or instructions throughout this manual
whose non-compliance could lead to erroneous or incalculable
behavior of the system.
WARNING!
The symbol indicates a potential risk of injury due to contact with
high voltage.