BT RRE140 - Page 107

Maintenance
Periodic maintenance
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 6 – 5
Carry out the 500 hour service together with the following:
Position Component Type of work Work to be carried out See Sec-
tion
0340.1 Motor hood Inspection Check the locking of the motor
hood
0340.2 Motor hood Lubrication Motor hood hinges
0350.1 Support arms Lubrication Beam contact surfaces for reach
carriage rollers
0350.2 Support arms Inspection Check wear and fixings of the
mechanical reach carriage stops
0390.1 Battery compartment Inspection Visual inspection of battery lock-
ing catch wear
0390.2 Battery compartment Lubrication The locking pin for the battery
catch
0390.4 Battery compartment Lubrication Support arm/roller bed sliding
surfaces
0390.5 Battery compartment Inspection Roller bed locking (Option)
0390.6 Battery compartment Inspection Wear on the roller bed sliding
blocks (Option)
0390.9 Battery compartment Inspection Inspect the sliding surfaces in
the unloading mechanism
0390.10 Battery compartment Lubrication The sliding surfaces in the
unloading mechanism
0620.1 Operator compartment Inspection Operator's seat mounting and
adjustment functions
0840.1 Chassis Inspection Tilt stop wear and sealing
2550.1 Gear Lubrication Chain gear rim (after careful
cleaning)
3180.1 Wheel brake Inspection Brake disc wear
3180.2 Wheel brake Adjustment Play in un-braked position
3180.3 Wheel brake Inspection Braking force
3180.4 Wheel brake Check on
tightening
torque
Locking screw of the wheel
brake in the supporting arm (34
Nm)
3370.1 Parking brake Inspection Play in un-braked position