14 – 14 Repair Manual RRE140/160/180/200/250 © BT
Hydraulic system 6000
Hydraulic connections (6230)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
14.3.2 Quick change connector
Assembling the quick change connector
1. Place the assembly stop (1) on the male fitting and make
sure that the dismantling ring (2) runs freely in the groove.
2. Push the male fitting into the female fitting until the assembly
stop makes contact with the female fitting.
3. The coupling is now made and locked.
To Next Page
Loading...
