BT RRE140 - Removing the Operating Console from the Truck

12 – 2 Repair Manual RRE140/160/180/200/250 © BT
Steering system 4000
Electric steering wheel (4310)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
12.1.3 Removing the operating console from
the truck
1. Expose the operating console by removing the screw (a) on the
right-hand side of the tiller arm and remove the panel.
2. Remove the screw (b) for the other panel section, located in front of
the tiller arm. Remove the entire panel.
3. Undo the connector unit (c) by the wall.
4. Remove the three screws (d) (torx 30) that hold the operating con-
sole in place and remove the operating console from the truck.
a
b
c
d