BT RRE140 - CID Service Symbols in the Display Area

4 – 22 Repair Manual RRE140/160/180/200/250 © BT
Functions and parameters
Operator compartment
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
CID service symbols in the display area
Service symbols may be displayed either as a possible selection for
accessing a service function or as an indication of an active service
function.
Most service symbols require connection of the CAN key or TruckCom
for them to be displayed.
The "Service" icon is selected in information mode, and it is indicated
by a double border. The function is activated by pressing the green but
-
ton.
Once the "Service" function has been activated, the service symbol
appears in the top left-hand corner of the display.
Sym-
bol
Description Sym-
bol
Description
Bleeding
Service function for
main cylinder bleeding.
Cabin tilt
Service function for tilt-
ing the cabin.
Configuration
Setting the calendar/
time, parameters and
PIN functions
Impact sensor
Read-out of the impact
sensor log.
Diagnostics
Service and fault finding
Error log
Read-out of the error
log.
Factory setting
Resets the operator
parameters to their
basic settings
Fan test
Service function for
testing the fans
PIN code
Programming PIN
codes
Calibration
Service function for cali-
brating sensors, etc.
Joystick
Calibration of joysticks
Mast
Service function for
operating the mast.