Steering system 4000
Steering bearings (4380)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 12 – 7
12.3 Steering bearings (4380)
If the steering bearing has to be replaced, remove the drive gear as in
the instructions - see the section "Replacing the drive gear".
12.3.1 Removing a steering bearing from the
drive gear
1. Undo the screws (a) and remove the steering bearing (b) from the
drive gear.
12.3.2 Placing a steering bearing on the drive
gear
1. Apply Loctite 242 to the screws (a).
2. Using the screws (a), place the steering bearing (b) on the drive
gear.
Tightening torque 23 Nm.
b
a
To Next Page
Loading...
