13 – 6 Repair Manual RRE140/160/180/200/250 © BT
Electrical system 5000
Control console (5510)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
13.2.5 Dismantling the control console
General
WARNING!
Static electricity!
Risk of static discharge that can damage the electronics.
Before starting work on the electronics, make sure you take the nec-
essary steps to prevent static electricity, in other words, ESD protec-
tion.
1. Insert a feeler gauge (arrow) on the side of the control console, at
the joint in the panels.
2. Remove the cover (a).
3. Remove the three screws (c) (torx 20) on the bottom of the control
console in order to release the lower cover (b).
a
c
To Next Page
Loading...
