Electrical system 5000
Control console (5510)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 13 – 7
4. Remove the four screws (d) (torx 20) that hold the border (e)
around the display (f).
5. Disconnect the cable harness from the display. Use the clamp on
the contacts to undo the contact from the circuit board.
6. Remove the border and printed circuit board.
7. Remove the 10 screws (j) (torx 20) from the bottom that hold the in-
ner plate (g) against the bottom section (h).
8. Release the panel adjustment catch (k) from its retainer in the sled
and lift the inner plate out (g).
j
g
h
k
To Next Page
Loading...
