BT RRE140 - Refitting

10 – 8 Repair Manual RRE140/160/180/200/250 © BT
Drive gear 2000
General
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
Placing the steering motor in the truck
See the section "Steering motor, fitting to the truck".
Placing the drive motor in the truck
See the section "Fitting the drive motor to the truck".
10.1.5 Refitting
1. Refit the floor and pedals. Join the connector unit for the pedal har-
ness.
2. Refit the fender behind the drive wheel and step.
3. Function test the truck.