4 – 48 Repair Manual RRE140/160/180/200/250 © BT
Functions and parameters
Functions
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
Travel speed
The travel speed in both drive wheel and fork direction can be adjusted
separately using parameters.
If it is not equipped with support arm brakes, the truck can drive at 10
km/h in the drive wheel direction and at 7 km/h in the fork direction.
If the truck has support arm brakes installed, it may drive at 14 km/h in
the drive wheel direction. In the fork direction, 10 km/h is permitted if the
truck is unladen and 8 km/h with a load of more than 1000 kg on the
forks.
If the parking brake is released and the travel direction selector is held
in a specific direction, the truck will drive at around 1 km/h. The speed
can be adjusted by means of a parameter.
Other speeds are also possible depending on the limitations, warnings
and errors that are specified.
There are three digital inputs that can generate special speeds; these
are parameter-based, provided as special options.
To Next Page
Loading...
