Troubleshooting
Warning and error codes
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 7 – 15
7.2 Warning and error codes
Abbreviations used in this section
Error code structure
The error codes consist of warnings and errors. An error code consists
of two parts, a group number and a code number, separated by a colon
(:), for instance: 1:181.
By studying the tables below we can read off that the error code origi-
nates from the CID (1:nnn), in the form of a warning (n:1nn) and relates
to a signal error from a sensor (n:n81). The sensor in question can be
identified using the error code tables in this section.
All codes start with a main group, 1–7, depending on the system they
belong to.
ACH (AC Hydraulic) Pump Control (T2)
ACT (AC Traction) Travel Control (T1)
CID Central Information Display (A1)
EPS (Electronic Power Steering) Steering Servo (A2)
FCU Fork Control Unit
GFU General Function Unit (A8)
LID Load Information Display (P6)
MCU Main Control Unit (A5)
Group number, error codes
Group: Description
1:nnn
CID
2:nnn
MCU
3:nnn
Traction force system
4:nnn
Hydraulic system
5:nnn
Steering system
6:nnn
Wire guidance (does not apply to RRE trucks)
7:nnn
GFU
To Next Page
Loading...
