BT RRE140 - Replacing a Wheel Bearing - Unbraked Wheel (B)

Brake and wheel 3000
Support arm wheel (3550)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 11 – 13
11.5.3 Replacing a wheel bearing – unbraked
wheel (B)
1. Remove the sealing rings (o, t) and the locking rings (p, s).
2. Tap out the bearing (q) and axle (r).
3. Turn the wheel over and remove the other bearing (q).
4. Fit a new bearing to the axle (r).
5. Place the locking ring (p) on the axle outside the bearing.
6. Place the bearing and axle in the wheel.
7. Place the other bearing (q) in the wheel and place the locking ring
(s) on the axle.
8. Place the washers (o, t) on the wheel.
B
o
p
q
r
q
s
t