BT RRE140 - Multi-Control

4 – 18 Repair Manual RRE140/160/180/200/250 © BT
Functions and parameters
Operator compartment
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
4.6.3 Multi-control
a: CID Central Information Display
c: Multi-control
ca: Fork lift
cb: Fork lowering
cc: Reach carriage - in
cd: Reach carriage - out
d: Tilt
e: Extra function 1 (sideshift, for example)
f: Extra function 2 and 3 (forkspread, for example)
g: 8 buttons for selectable functions (parameter-based)
Function examples:
- Height preselector.
- Height limitation override. The function is active for 5 seconds,
and if the the first height limitation is passed, the next one applies.
- Horizontal tilt position.
- Sideshift zero position.
- Selection of extra hydraulic function 3 (active as long as the func-
tion is used and for 15 seconds afterwards) or switching detected
by service parameter.
- Operator cabin tilt.
- Turn signal lights.
h: Travel direction selector.
j: Horn.
a
j
h
e
f
c
g
j
d
ca
cb
cc
cd