9 – 14 Repair Manual RRE140/160/180/200/250 © BT
Motors 1000
Drive motor (1760)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
5. Remove the six screws (6 mm allen screws) that hold the drive mo-
tor in place.
6. Remove the cap at the centre of the parking brake (2.5 mm allen
screws).
7. Attach the lifting eye V11-1258 (M12x20 mm) to the drive motor
shaft.
8. Carefully lift the motor straight up; paying attention to the splines on
the output shaft of the motor. The motor weighs approximately
40
kg.
IMPORTANT!
Risk of spline damage.
The splines on the end of the motor are easily damaged.
Be careful when lifting out the motor.
V
W
To Next Page
Loading...
