3 – 4 Repair Manual RRE140/160/180/200/250 © BT
General safety rules
Safe lifting
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
• Use the lever supplied with the jack. If the lever is too short, it will re-
quire more effort than is necessary. If the lever is too long there is a
risk that the jack will be overloaded.
DANGER!
Risk of crushing – a poorly chocked truck may fall.
• Never work under a truck that is not blocked with supports or secured
by a lifting device.
• Place supports:
- as close to the raised part of the chassis as possible to reduce the
falling height if the truck tips over
- so that the truck cannot roll.
• Never place a support under the jack to increase the lifting height.
• Never work under a lifted truck without appropriate supports.
To Next Page
Loading...
