9 – 18 Repair Manual RRE140/160/180/200/250 © BT
Motors 1000
Drive motor (1760)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
6. Insert the screws of the power terminal block (h) and tighten.
7. Insert and tighten the long screws (c) – tightening torque 15 Nm.
8. Refit the speed sensor (d) along with its harness (g).
9. Replace the contact in the holder under the power cables.
10. Fit the parking brake - see the section "Fitting the parking brake to
the truck".
a
b
c
d
f
g
h
To Next Page
Loading...
