14 – 2 Repair Manual RRE140/160/180/200/250 © BT
Hydraulic system 6000
Hydraulic unit (6100)
T-code Valid from serial number Date Publication No.
815, 816 6051502 2008-08-21 261828-040
14.1.1 Hydraulic tank, draining
Method a (recommended):
1. Release the pressure hose for extra hydraulic functions, located
beside the mast.
2. Use a bucket or similar to collect the oil.
3. Activate the extra function by the means of the corresponding con-
trol lever pushed to lowest possible flow.
The oil must not be reused and shall be sent for destruction accord-
ing to normal procedures.
Method b:
Use suitable pump to drain the tank.
The oil must not be reused and shall be sent for destruction accord-
ing to normal procedures.
To Next Page
Loading...
