Hydraulic system 6000
Main valve (6210)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 14 – 9
7. Place protective plugs on all hoses and the main valve.
8. Disconnect all cables from the main valve, (check that their mark-
ings are legible).
9. Undo the two screws (6 mm allen screws) that hold the valve in
place in the reach carriage, and remove the main valve.
10. Reassemble in reverse order.
11. Before any hydraulic function is initiated:
12. Put the truck program in service mode and activate the service po-
sition for bleeding.
To Next Page
Loading...
