DIAPER FEEDER Device
MATRIX CUBE - 93 -
DIAPER FEEDER Troubleshooting and Maintenance
Indications Provided by the Red LEDs on DIAPER FEEDER Device
Status of DIAPER FEEDER
device
Led on the TS44.. sensor
Identification BLINKING GREEN/RED ALTERNATE
FLASHING
ERROR E2 BLINKING GREEN/RED ALTERNATE
FLASHING
MOTOR LOCKED
(with CONTROL (+) button)(*)
ON ON
TENSION ERROR BLINKING GREEN/RED ALTERNATE
FLASHING
(*) This condition is obtained when you are working with the tension defined in P2. If you are working with
the tension defined in P1, even if you press the Control (+) button, the LEDs remain off. However,
pressing the Control button, the tension defined in P1 will be displayed.
To interpret the failure condition and restore the normal operating conditions, please refer to the
following table.
To Next Page
Loading...
