WEB UP function
MATRIX CUBE - 39 -
WEB-UP function
This function allows you to visually locate the correspondence between the TS55 sensor and the DIAPER
FEEDER devices, in order to avoid yarn exchange conditions along the path.
Enter the SETUP menu.
Select WEB-UP.
This screen indicates that the combination (TS55 and
DIAPER FEEDER) No.1 is currently selected. Turning the
selector switch you may select in turn the other
combination .
The red LEDs will blink on the selected combination (TS55
and DIAPER FEEDER) in order to make easier the location
of devices association.
EXIT to return to configuration menu
SETUP
→
WEB-UP
To Next Page
Loading...
