Buffalo LS421DE - Settings up a Printer with Windows 8, Windows 7, or Windows Vista

65
• Don’t disable the SMB protocol while the printer server is enabled. If you do, you will need to enable SMB again
and reconfigure the print server from scratch.
Settings up a Printer with Windows 8, Windows 7, or Windows
Vista
1 Connect a printer to the LinkStation’s USB port, then turn the printer on.
2 In Advanced Settings, click Services.
3 Move the Print Server switch to the position to enable the Print Server.
4 Refer to the manual supplied with the printer and install the printer drivers.
5 Launch NAS Navigator2. Double-click your LinkStation’s icon.
6 Double-click the icon of the connected printer (shared name is displayed).
7 Click OK.
8 Select your printer, then click OK.