Buffalo LS421DE - NAS Navigator2 for Mac OS

81
any other hard drive.
NAS Navigator2 for Mac OS
NAS Navigator2 is a utility program that makes it easy to display Settings, change the LinkStation’s IP address, or check
its hard drive. If you installed the LinkStation with the LinkNavigator CD, NAS Navigator2 was installed automatically.
To launch it, click the icon in the Dock.
Click your LinkStation’s icon to open a share on the LinkStation and display:
• Total capacity
• Capacity in use
• IP address
• Workgroup
• Subnet mask
• Default gateway
• MAC address
• Firmware version
Name Description
Open Opens the default shared folder for a selected LinkStation.
Refresh Searches for NAS devices on the network again.
Settings Opens Settings for the selected LinkStation.
Configure
Opens a window that lets you configure the NAS’s IP
address or open Settings.
Label Color Selects the color of the name displayed below the icon.
View Options Lets you choose icon size, position, and view mode.
Auto Power Mode
Auto power mode can turn supported TeraStations and
LinkStations on the network on and off automatically.