85
I28 Formatting USB hard drive. -
I46
Data migration or conversion (RAID
migration) is in progress.
Do not turn off the LinkStation power.
I47
Data migration or conversion (RAID
migration) is in progress.
Do not turn off the LinkStation power.
I52
A new firmware version has been
released.
Update the firmware.
I54 X th backup task has been failed.
Make sure X th backup task is configured
correctly. (“X” is backup task number.)
The LinkStation or TeraStation may be in
standby mode. Start the NAS on. If the
backup task still fails, check the status
of NAS, network, and backup source or
destinations.
Steady Amber
While the function LED glows a steady amber, a new firmware version has been released. Update the firmware to new
version.
Default Settings
Administrator’s Name admin
Password password
Shared Folders
“share” (for both Windows and Mac computers). The recycle bin is enabled on
“share” by default.
DHCP Client
Normally, the LinkStation will get its IP address automatically from a DHCP
server on the network. If no DHCP server is available, then an IP address will
be assigned as follows:
IP address: 169.254.xxx.xxx (xxx is assigned randomly when booting the
LinkStation.)
Subnet mask: 255.255.0.0
Registered Group
“hdusers”, “admin”, and “guest”
You cannot edit or delete them.
Microsoft Network Group Setting WORKGROUP
Ethernet Frame Size 1518 bytes (Including 14 bytes of the header and 4 bytes of FCS)
SMB2 Disabled
AFP Enabled
FTP Disabled
NTP Enabled
Print Server Disabled
WebAccess Disabled
Time Machine Disabled
DLNA Server Disabled
iTunes Server Enabled
BitTorrent Disabled
USB Device Server Disabled
Update Notification Enabled
To Next Page
Loading...
