SECTION 2 - OPERATION
2-47
Roof-Mounted Work Lights (Optional)
Additional roof -mounted work lights, 1, are
available to provide increased illumination to the
front and back of the tractor. The lights are fully
adjustable side to side, and up and down.
The roof -mounted work lights will be activated
when the rotary light switch is in position five.
Figure 2-68
1
Trailer Socket
The trailer socket, 1, is attached to the hydraulic
remote coupler bracket at the rear of the tractor.
It is a seven-pin connector that can be used for a
trailer light hookup or as an outlet to attach the
implement status switch on tractors equipped
with an optional performance monitor.
Figure 2-69
1
The pins in the socket are identified as follows:
Pin 1 - Ground
Pin 2 - Trailer lights
Pin 3 - Left flasher
Pin 4 - Implement status switch
Pin 5 - Right flasher
Pin 6 - Tail lamps
Pin 7 - Auxiliary
Figure 2-70
19992757
1
2
3
4
5
6
7
To Next Page
Loading...