SECTION 2 - OPERATION
2-115
38.1 mm (1/2”) Drawbar Pin Kit
(Manual Hitch Pin)
38.1 mm (1/2”) Drawbar Pin Kit
(Automatic Hitch Pin)
38.1 mm (1/2”) Drawbar Pin Kit
The 38.1 mm (1-1/2″) drawbar pin conversion kit
is available from your Buhler Versatile dealer as
part #86027940 (Manual) and #86030679
(Automatic). This kit allows the existing drawbar
pin to be replaced with a 38.1 mm (1-1/2″)
diameter pin to fit implements with 38.1 mm
(1-1/2″) tongue holes.
Figure 2-152
Figure 2-153
To Next Page
Loading...
