Buhler Versatile 2290 - Drawbar Assembly; Manual Hitch Pin - BSN 300919

SECTION 2 - OPERATION
2-111
NOTE: In order to remote mount the
implement status switch on a trailing
implement, the tractor will require a
remote mount wiring harness kit available
from your Buhler Versatile dealer (part
#86001101). The wiring harness has a
male connector that will plug into the
trailer light socket at the rear of the tractor
and will connect the remote mount
implement status switch with the TPM via
the tractor’s wiring harness. No additional
wiring modifications are necessary to
remote mount the implement status
switch.
Figure 2-143
DRAWBAR ASSEMBLY
Manual Hitch Pin - BSN 300919
Automatic Hitch Pin - ASN 300918
Figure 2-144
Figure 2-145