EasyManua.ls Logo

Buhler Versatile 2290 - 12 X4 Quad Shift III Mechanical Transmission

Buhler Versatile 2290
380 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION 5 - SPECIFICATIONS
5-16
TRANSMISSION
12x4 Quad Shift III Mechanical Transmission
Number of speeds 12 forward speeds; 4 reverse speeds...........................................
Shift type 4 synchronized gears in each of 3 forward ranges........................................
Gear shifting double cone style synchronizer on the top shaft.......................................
Range shifting sliding collars on the bottom shaft.................................................
Lubrication self-contained pump, reservoir providing..............................................
pressurized lubrication to bearings and gears
Clutch type hydraulically actuated wet clutch on the input shaft.....................................
Clutch diameter 280 mm (11).................................................................
Number of clutch plates 6 friction, 6 separator....................................................
Clutch brake hydraulically actuated on second shaft...............................................
140 mm (5.5)diameter,
3 plates (1 separator, 2 friction)
Filter 10-micron w/344 kPa (50 PSI) bypass relief.................................................
12x2 Powershift Transmission
Number of speeds 12 forward speeds; 2 reverse speeds...........................................
Shifting type electrically actuated - valve activates 3 (out of 8) clutch................................
packs to provide the selected gear ratio
Type of gear constant mesh spur...............................................................
Clutch type hydraulically actuated on fourth shaft.................................................
Clutch diameter 229 mm (9)..................................................................
Clutch brake electronically controlled by activating opposing clutches................................
Lubrication self-contained pump, reservoir providing..............................................
pressurized lubrication to bearings and gears
Filter 10-micron w/344.8 kPa (50 PSI) bypass relief...............................................

Table of Contents

Related product manuals