2-1
SECTION 2
OPERATION
INTRODUCTION
Read this section thoroughly. It details the
location and operation of the various
instruments, switches and controls on your
tractor. Even if you operate other tractors, you
should thoroughly read this section of the
manual and be sure that you are familiar with the
location and function of all the features of the
tractor.
Do not start the engine or attempt to drive or
operate the tractor until you are fully
accustomed to all the controls. It is too late to
learn after the tractor is moving. If in doubt about
any aspect of operation of the tractor, consult
your authorized dealer.
Pay particular attention to the break-in
recommendations to ensure that your tractor
will give the long and dependable service for
which it was designed.
See Section 3 for lubrication and maintenance
requirements. Tractor specifications are listed in
Section 5.
To Next Page
Loading...
