5-37
Introduction 1-1...............................
Liquid ballast table 5-24........................
Lockout levers 2-127..........................
Low coolant level 2-79.........................
Low engine oil pressure 2-75...................
Lubricants specifications 5-22..................
Lubrication 3-1...............................
Lubrication and maintenance chart 3-8..........
Lubrication and maintenance, as required 3-67...
Lubrication and maintenance,
every 10 hours or daily 3-10.................
Lubrication and maintenance,
every 50 hours 3-28........................
Lubrication and maintenance,
every 250 hours 3-33.......................
Lubrication and maintenance,
every 500 hours 3-42.......................
Lubrication and maintenance,
every 1000 hours 3-51......................
Lubrication and maintenance,
every 1500 hours or yearly 3-54..............
Lubrication and maintenance,
every 2000 hours or 2 years 3-62............
Lubrication and maintenance,
indicated by warning light 3-65...............
Lubrication and maintenance 3-1...............
Master PTO shield 1-11........................
Maximum allowable machine weight 5-8.........
Metric hardware and locknuts chart 5-34.........
Midmount weight kit 5-11......................
Mirror 2-32...................................
Normal operation of the electronic
instrument control system 2-53..............
Opening the hood panels 3-5...................
Operating continuous flow hydraulic
equipment 2-132...........................
Operating remote equipment,
simultaneously 2-134.......................
Operation 2-1................................
Operator seat controls 1-27....................
Operator’s control console 2-10.................
Operator’s controls 2-103......................
Operator’s manual holder 1-1...................
Operator’s seat 2-6...........................
Optional equipment 5-31.......................
Optional hydraulic equipment 2-135.............
Optional transmission and axle weights 5-12......
Overall description 1-3.........................
Overall heights 5-2............................
Overall w idths 5-3.............................
Overhead climate controls 2-29.................
Air conditioning 2-30........................
Heater 2-29...............................
Pressurizer v ents 2-31......................
Overhead controls 1-22........................
Overview, controls and instruments 1-19.........
Park brake alert 2-89..........................
Park Brake 2-33..............................
Part numbers for high usage items 5-30..........
Power take--off (optional) specifications 5-18.....
Powershift transmission operation 2-37..........
Powershift transmission shifting 2-37............
Precautionary statements 0-5,..................
2-2
Pre-operation checklist 1-37....................
Pressure release detent adjustment 2-129........
Prestart Inspection 2-21.......................
Preventing system contamination 3-1............
Programming and calibrating 2-106..............
Proper Tire selection 2-153.....................
PTO operation 2-118..........................
Quick couplers 2-130..........................
Quad Shift III 12x4 operation 2-34...............
Quad Shift III shifting 2-35......................
Quick hitch operation (optional) 2-145...........
Radar ground speed sensor 2-102..............
Radio (optional equipment) 2-32................
Rear window wiper switch 2-14.................
Remote control operation 2-126.................
Remote valve access 3-6......................
Removing the hood panels 3-5.................
Removing the shielding to gain access to
components for inspection and
maintenance 3-5...........................
Replacement bulbs 5-30.......................
Right console 2-18............................
Right rear window 2-5.........................
Right side console controls 1-23................
Roof-mounted work lights 2-47.................
Safety 0-4...................................
Safety decals 0-11............................
Seat adjustments 2-7..........................
Seat belt 2-6.................................
Shield, r emoving 3-5..........................
Shielding 1-10................................
Specifications 5-1.............................
Speed chart 5-23.............................
Starter solenoid shield 1-10....................
Steering specifications 5-19....................
Steering wheel and column 2-9.................
Stopping the tractor 2-29.......................
Storage tray 2-165............................
3-Point hitch (optional) 2-135...................
3-Point hitch description 2-135..................
3-Point hitch controls 2-136....................
Automatic raise/lower switch 2-136...........
Manual raise/lower switch 2-137.............
Rotary depth control knob 2-137.............
Rotary lowering rate control k nob 2-138
.......
Rate of hitch raise adjustments 2-138.........
3-Point hitch operation 2-150...................
3-Point H itch (optional) specifications 5-19.......
Throttle 2-26.................................
Tire configuration 1-12.........................
Tire load and inflation table 5-25................
Tire load radius 5-29..........................
Tires and articulation blocks 2-153..............
Tire weights 5-9..............................
Toolbox 2-165................................
Towing the tractor 1-35........................
TPM switch & ICMS 2-104.....................
Tr actor boosting 2-25..........................
Tractor identification 1-6.......................
Tractor identification data 1-5...................
To Next Page
Loading...
