11
Technical data
6. TECHNICAL DATA
6.1. Technical data of the SE32
6.1.1. Conditions of use
Ambient temperature
(in operation)
–10...+60 °C
Air humidity
< 80%, non condensated
Height above sea level
2000 m max.
Operating conditions
Continuous
Equipment mobility
Fixed
Use
Indoor and outdoor
(Protect the device against electro-
magnetic interference, ultraviolet rays
and, when installed outdoors, against
the effects of climatic conditions)
Installation category
Category I according to UL/EN 61010-1
Degree of pollution
Degree 2 according to UL/EN 61010-1
Protection class
according to IEC/
EN 60529
IP65
1)
, device wired and connectors
plugged-in and tightened or sealed
1)
not evaluated by UL
6.1.2. Compliance to standards and
directives
The applied standards, which verify conformity with the EU Direc-
tives, can be found on the EU Type Examination Certificate and/or
the EU Declaration of Conformity (if applicable).
UL-Certification
Finished products with variable key PU01 or PU02 are UL-certified
products and comply also with the following standards:
• UL 61010-1
• CAN/CSA-C22.2 n°61010-1
Identification on the device Certification Variable key
UL-recognized PU01
Measuring
Equipment
EXXXXXX
®
UL-listed PU02
6.1.3. Dimensions
→ Please refer to the technical data sheet regarding the type SE32,
available at: www.burkert.com
English
Type 8032 - SE32
To Next Page
Loading...
