Burkert 8032 User Manual

6
About these Operating Instructions
1. ABOUT THESE OPERATING
INSTRUCTIONS
These Operating Instructions describe the entire life cycle of the
device. Please keep these Operating Instructions in a safe place,
accessible to all users and any new owners.
These Operating Instructions contain important safety
information.
Failure to comply with these instructions can lead to hazardous
situations. Pay attention in particular to the chapters 3. Basic
safety information and 2. Intended use.
▶ Whatever the version of the device, these Operating Instructions
must be read and understood.
1.1. Symbols used
Danger
Warns against an imminent danger.
▶ Failure to observe this warning will result in death or in serious
injury.
Warning
Warns against a potentially dangerous situation.
▶ Failure to observe this warning can result in serious injury or
even death.
Caution
Warns against a possible risk.
▶ Failure to observe this warning can result in substantial or minor
injuries.
note
Warns against material damage.
indicates additional information, advice or important
recommendations.
refers to information contained in these Operating Instruc-
tions or in other documents.
▶ Indicates an instruction to be carried out to avoid a danger, a
warning or a possible risk.
→ Indicates a procedure to be carried out.
1.2. Definition of the word "device"
The word "device" used within these Operating Instructions refers
to:
• the flowmeter / the flow threshold detector type 8032
or
• the flow transmitter / the flow threshold detector type SE32.
English
Type 8032 - SE32

Burkert 8032 Specifications

General

Brand	Burkert
Model	8032
Category	Measuring Instruments
Language	English