9
General information
4. GENERAL INFORMATION
4.1. Manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2. Warranty conditions
The condition governing the legal warranty is the conforming use
of the device in observance of the operating conditions specified in
these Operating Instructions.
4.3. Information on the Internet
You can find the Operating Instructions and technical data sheets
regarding the type 8032 and the type SE32 at: www.burkert.com
5. DESCRIPTION
5.1. Construction of the SE32
The SE32 is a flow transmitter / flow
threshold detector with display.
In a flow transmitter version, the SE32 has:
- 1 current output and 1 relay output
or
- 1 current output
In a threshold detector version, the SE32 has
1 or 2 on/off outputs, i.e.:
- 1 or 2 transistor output(s) NPN/PNP
or
- 1 relay output
5.2. Construction of the 8032
A
B
A: Sensor-fitting type S030 including the
paddle-wheel flow sensor.
Operating Instructions for the S030
sensor-fitting are available under
www.burkert.com
B : Flow transmitter / flow threshold
detector type SE32 (see chap. 5.1).
English
Type 8032 - SE32
To Next Page
Loading...
Need help?
General
