Burkert 8032 - Your Settings For The 8032; The Se32 With S077; Default Settings

48
Adjustment and functions
9.7. Default settings
At first power-up of the device, the configuration of the 8032 or the SE32 with S077 is the following:
Flow rate
unit
K-factor Relay or transistor output Current
output
Filter Bar graph Backlighting Code
UNIT KFAC Operation OLO
threshold
OHI
threshold
DEL 4 mA 20 mA FILTER BG LO BG HI BKLG BDEL CODE
l/s 1 imp./l Hysteresis, inverted 0
1)
0
1)
0 s 0
1)
100
1)
2 0
1)
0
1)
5 0 s 0000
2)
1)
In the unit set within the UNIT function (l/s, by default).
2)
By default, the access code is not requested (CODE=OFF).
9.8. Your settings for the 8032 / the SE32 with S077
Flow rate
unit
K-factor Relay or transistor output Current
output
Filter Bar graph Backlighting Code
UNIT KFAC Operation OLO
threshold
OHI
threshold
DEL 4 mA 20 mA FILTER BG LO BG HI BKLG BDEL CODE
1)
Hysteresis operation:
ON
OFF
OLO OHI
2)
Window operation:
ON
OFF
OLO OHI
English
Type 8032 - SE32