33
Adjustment and functions
• When the device is switched on and the cover is open,
protection against electric shock is no longer guaranteed.
• Check the chemical compatibility between the fluid to
be measured and the materials from which the device is
made exposed to it.
9. ADJUSTMENT AND FUNCTIONS
9.1. Safety information
Danger
Risk of injury due to electrical voltage
▶ If a 12...36 V DC powered version is installed either in a wet
environment or outdoors, all the electrical voltages must be of
max. 35 V DC.
▶ Observe all applicable accident protection and safety guidelines
for electrical equipment.
Warning
Risk of injury due to nonconforming adjustment.
Nonconforming adjustment could lead to injuries and damage the
device and its surroundings.
▶ The operators in charge of adjustment must have read and
understood the contents of this manual.
▶ In particular, observe the safety recommendations and intended
use.
▶ The device/installation must only be adjusted by suitably trained
staff.
English
Type 8032 - SE32
To Next Page
Loading...
