Burkert 8032 - Page 2

To Next Page

To Previous Page

We reserve the right to make technical changes without notice.

Technische Änderungen vorbehalten.

Sous réserve de modifications techniques.

Operating Instructions 1903/04_EU-ML 00560375 / Original_FR

Main Page

Table of Contents3
About These Operating Instructions6
Symbols Used6
Definition Of The Word "Device6
Intended Use7
Basic Safety Information7
Description9
General Information9
Manufacturer's Address And International Contacts9
Warranty Conditions9
Information On The Internet9
Construction Of The Se329
Construction Of The 80329
Construction Of The Se32 With Sensor-Fitting S07710
Description Of The Rating Plate10
Technical Data11
Technical Data Of The Se3211
- Conditions of Use11
- Compliance to Standards and Directives11
- Dimensions11
- Material Data12
Electrical Data12
Technical Data Of The 803213
- Conditions of Use13
- Compliance to Standards and Directives13
- Dimensions14
- Material Data14
- Electrical Data of the 803214
- Fluid Data15
Technical Data Of The Se32 With S077 Sensor-Fitting16
- Conditions of Use16
- Compliance to Standards and Directives16
- Dimensions16
- Material Data16
- Electrical Data16
- Fluid Data17
- Installation And Wiring17
Safety Information17
Fluid Installation Of The 803218
- Install the S030 Sensor-Fitting on the Pipe18
- Assemble the SE32 with the S030 Sensor-Fitting20
- Finalise the Installation of the 803220
Fluid Installation of the Se32 with an S077 Sensor-Fitting20
- Install the S077 Sensor-Fitting on the Pipe20
- Assemble the SE32 with the S077 Sensor-Fitting21
- Sensor-Fitting21
Wiring21
- Data of the Cables and Wires22
- Assembling the Connectors22
- Wiring a Version with Transistor Output and en 175301-803 Male Fixed Connector23
- Wiring a Version with 2 Transistor Outputs and a 5-Pin M12 Male Fixed Connector24
- Wiring of the Version with a Single Relay Output26
- Wiring of the Version with a Single Current Output28
- Wiring the Version with both Relay and Current Outputs (5-Pin M12 Male Fixed Connector)29
- Wiring the Version with both Relay and Current Outputs (8-Pin M12 Fixed Connector)30
- Commissioning32
Safety Information32
Adjustment And Functions33
Safety Information33
Operating Levels34
Description Of The Display And The Operating Keys35
Process Level35
Configuration Level - Parameters Menu37
- Selecting the Unit of the Flow Rate38
- Entering the K-Factor or Having It Determined by Teach-In39
- Configuring the Relay or Transistor Output40
- Setting the Flow Rate Range Associated to the 442
- Choosing the Filter of the Flow Rate42
- Entering the Flow Rate Range Related to the Bar Graph43
- Adjusting the Brightness of the Backlight or Deactivating the Backlight44
- Activating and Defining the Access Code to the Configuration Level44
- Saving the Modified Parameters45
- Configuration Level - Test Menu46
Adjusting the 447
Your Settings For The 8032 / The Se32 With S07748
Default Settings48
Maintenance And Troubleshooting49
Safety Information49
Maintenance And Cleaning49
If You Encounter Problems50
Spare Parts And Accessories51
Packaging, Transport52
Storage52
Disposal Of The Device52

Burkert 8032 - Page 2

Table of Contents

Related product manuals