Burkert 8032 User Manual

4
7.2.3. Finalise the installation of the 8032 ................................20
7.3. Fluid installation of the SE32 with an S077
sensor-fitting ...................................................................................... 20
7.3.1. Install the S077 sensor-fitting on the pipe ....................20
7.3.2. Assemble the SE32 with the S077 sensor-fitting .......21
7.3.3. Finalise the installation of the SE32 with S077
sensor-fitting ........................................................................21
7.4. Wiring ...................................................................................................... 21
7.4.1. Data of the cables and wires ............................................22
7.4.2. Assembling the connectors .............................................22
7.4.3. Wiring a version with transistor output and
EN 175301-803 male fixed connector ..........................23
7.4.4. Wiring a version with 2 transistor outputs and a
5-pin M12 male fixed connector ......................................24
7.4.5. Wiring of the version with a single relay output ............. 26
7.4.6. Wiring of the version with a single current output ......... 28
7.4.7. Wiring the version with both relay and current
outputs (5-pin M12 male fixed connector) ...................... 29
7.4.8. Wiring the version with both relay and current
outputs (8-pin M12 fixed connector)..............................30
8. COMMISSIONING ........................................................................................32
8.1. Safety information ........................................................................... 32
9. ADJUSTMENT AND FUNCTIONS .........................................................33
9.1. Safety information ........................................................................... 33
9.2. Operating levels ................................................................................34
9.3. Description of the display and the operating keys ........ 35
9.4. Process level ......................................................................................35
9.5. Configuration level - Parameters menu ...............................37
9.5.1. Selecting the unit of the flow rate ...................................38
9.5.2. Entering the K-factor or having it determined by
Teach-In .................................................................................39
9.5.3. Configuring the relay or transistor output ......................40
9.5.4. Setting the flow rate range associated to the
4...20 mA output ..................................................................42
9.5.5. Choosing the filter of the flow rate ..................................42
9.5.6. Entering the flow rate range related to the bar graph . 43
9.5.7. Adjusting the brightness of the backlight or
deactivating the backlight .................................................44
9.5.8. Activating and defining the access code to the
Configuration level ..............................................................44
9.5.9. Saving the modified parameters ......................................45
9.6. Configuration level - Test menu ............................................... 46
9.6.1. Adjusting the 4...20 mA output .......................................47
9.7. Default settings ................................................................................. 48
English
Type 8032 - SE32

Burkert 8032 Specifications

General

Brand	Burkert
Model	8032
Category	Measuring Instruments
Language	English