Burkert 8694 - Auxiliary Functions

71
Operation and function
16.2 Auxiliary functions
Thefollowingadditionalfunctionscanbeconguredandparameterizedviathecommunicationssoftware:
Function Description
Reversaloftheeective
direction of the actuator
DIR.ACT
Assignment of the aeration status of the actuator chamber to the actual position
Signal split range
SPLTRNG
Signal split range; input signal as a % for which the valve runs through the entire
stroke range.
Stroke limit
X.LIMIT
Limit the mechanical stroke range
Limit actuating time
X.TIME
Limit the control speed
Control parameters
X.CONTROL
Parameterize the position controller
Safety position
SAFEPOS
Input the safety position
Cable break detection
31)
SIG.ERROR
Congurationofsignallevelfaultdetection
Digital input
31)
BINARY.IN
Activation of the digital input
Analog output
31)
OUTPUT
Congurationoftheoutputs(onlywithauxiliaryboardforanaloguefeedback
signal or digital outputs)
Table 35: Auxiliary functions
31) Only for variant without eldbus communication.
english
Type 8694 REV.2