Burkert 8694 - 2 Intended Use

9
Intended use
2 INTENDED USE
ThePositonerType8694REV.2isdesignedtobemountedonpneumaticactuatorsofprocessvalves
forthecontrolofmedia.Thepermitteduidmediaarelistedinthetechnicaldata.
▶ Use the device for its intended purpose only. Non-intended use of the device may be dangerous to peo-
ple, nearby equipment and the environment.
▶ Correct transportation, correct storage as well as correct installation, commissioning, operation and
maintenance are essential for reliable and problem-free operation.
▶ When using the device, observe the permitted data, operating conditions and application conditions.
This information can be found in the contractual documents, the operating instructions and on the type
label.
▶ Use the device only in conjunction with third-party devices and components recommended and autho-
rized by Bürkert.
▶ Do not use the device outdoors without protection from the weather.
▶ In potentially explosive atmosphere, only use devices approved for use in those areas. These devices
are labeled with a separate Ex type label. For such use, note the information provided on the separate
Ex type label and the additional explosion-related information or separate explosion-related operating
instructions.
english
Type 8694 REV.2