Instruction Manual for Lenus Care Bed
Page 16
2.3.8 Special mechanical features (optional equipment)
– Removable comfort mattress base comprises 50 individual spring elements. These
elements are designed to mould themselves closely to the shape of the body and help to
ventilate the mattress. Their flexibility also ensures that the pressure is optimally distributed.
The comfort mattress base also significantly contributes to preventing pressure ulcers.
Bed extension, integral, extends the bed by approx. 20 cm. In this case, longer safety side
bars and side panels and a support base will be needed for the bed.If required, please
consult our sales department (see chapter 6.4)
2.3.9 Materials used
For the most part, the bed is manufactured from steel profiles whose surfaces are finished with
a polyester powder coating or a metal coating of zinc or chrome.
The head and footboards and safety sides are made of wood or wood-based material with
sealed surfaces. All surfaces that can be touched during normal use have been tested for bio-
compatibility and are harmless to humans when in contact with the skin.
2.3.10 Structural design
Mattress base
The mattress base is divided into a backrest, a fixed seat section, a thigh rest and a lower leg
rest. The rests are adjustable. The mattress base can be raised and lowered horizontally or set
to the reverse-Trendelenburg position with the foot end lowered (optional Trendelenburg
position also available).
Bed chassis
The bed chassis is constructed from welded steel tubing and is equipped with four castors
which can be locked in pairs at the foot and head end of the bed.
To Next Page
Loading...
