burmeier Lenus - Checklist: Inspection by the User

Instruction Manual for Lenus Care Bed
Page 30
3.10.1 Checklist: Inspection by the user
Check
WHAT ? HOW ?
O
K
Not
OK
Description
of defect
Visual inspection of the electrical components
Handset
Damage?
Handset cable
Damage, cables routed
away from moving parts?
Power adapter
Visual inspection of the mechanical components
Patient lifting pole, lifting
pole sleeves, grab handle
with strap (optional features)
Damage, cracks
Chassis
Damage, deformations?
Mattress base
Damage?
Wooden surround
Damage, splinters?
Safety sides
Damage, deformation,
splinters?
Functional check of the electrical components
Handset, locking functions
Functional test
Rests
Functional test
Height adjustment
Functional test
Reverse-Trendelenburg
position
Functional test
Special function, adjustment
to an even lower position
Functional test: Warning
tone and half-speed lowering
Functional check of the mechanical components
Castors
Braking, moving
CPR release of backrest
Test according to instruction
manual
Safety sides
Locked in place, unlocked?
Accessories (e.g. patient
lifting pole, grab handle)
Suitability, secure fastening,
damage?
Inspector’s signature:
Inspection result:
Date:
If damage or a malfunction is suspected, the care bed must be withdrawn
from service immediately and disconnected from the mains supply until the
defective parts have been repaired or replaced!
Report this immediately to the operator!