burmeier Lenus - By the user

Instruction Manual for Lenus Care Bed
Page 66
6.1 BY THE USER
If damage or a malfunction is suspected, the bed must be withdrawn
from service immediately and disconnected from the mains supply
until the defective parts have been repaired or replaced!
Contact the operator responsible if the defective parts need to be
replaced or repaired.
Besides the regular comprehensive inspections by qualified technical staff, the user
(care staff, caregiving relatives etc.) must also carry out a minimum of visual inspections
and functional checks at short, regular intervals and before use by a new occupant.
Recommendation: Inspect all electrical and mechanical components once a month. In
addition to the above, check the power adapter, power cable and handset cable every
time they have been subjected to mechanical stress and each time after the bed has
been moved to a new location.
Checklist: Inspection by the user
Check
What? How?
O
K
Not
OK
Description of defect
Visual inspection of the electrical components
Handset, handset cable
Damage, routing of cable
Power adapter/mains
cable
Damage, routing of cable
Handset
Damage, foil
Visual inspection of the mechanical components
Patient lifting pole,
adapter sleeves
Damage, deformation
Chassis
Damage, deformation
Wooden surround
Damage, splinters
Mattress base frame
Damage, deformation
Safety side bars
Damage, splinters
Functional check of the electrical components
Handset
Function test, locking function
Functional check of the mechanical components
Castors
Braking, moving
Emergency release of
the backrest
Test according to instruction
manual
Screws and bolts
Fixed securely
Safety sides
Safe locking, unlocking
Lower leg rest
Engages properly
Motor bolt
Fixed securely
Accessories (e.g. patient
lifting pole, grab handle)
Fastening, damage
Inspector’s signature:
Inspection result:
Date: