EasyManua.ls Logo

burmeier Lenus - Grab Handle* (Triangular Grab Handle)

burmeier Lenus
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction Manual for Lenus Care Bed
Page 49
4.5.5 Grab handle* (triangular grab handle)
A triangular grab handle can be attached to the patient lifting pole (accessory, see
chapter 8).
The resident can use this triangular grab handle to sit up and readjust his/her position
more easily.
Check the grab handle and strap regularly for damage (see chapters 6.1
and 6.2).
Replace damaged grab handles or straps immediately.
Service life:
A date is printed on the grab handle. In normal use, the grab handle has a
service life of at least five years. After this period, a visual and functional
inspection must be carried out every six months to determine whether the
handle may continue to be used.
Attachment
Slide the fixed loop of the grab handle over the
first bolt on the patient lifting pole.
Check that the grab handle is securely attached
by tugging hard on it.
The maximum loading capacity at the front
end of the patient lifting pole is 75 kg.
Height adjustment
The height of the triangular grab handle can
be adjusted using the strap.
Make sure that the strap is correctly threaded
through the buckle.
Make sure that the end of the strap projects at
least 3 cm from the buckle A .
At least 3 cm
A

Table of Contents

Related product manuals