Instruction Manual for Lenus Care Bed
Page 63
5.4 CLEANING AND DISINFECTION AGENTS
Pay attention to the following recommendations to ensure that the bed functions and
usability are preserved as long as possible:
• Do not use scouring agents, stainless steel cleaning agents,
abrasive cleaning agents or scouring pads.
These substances can damage the surfaces.
• Cleaning and decontaminating agents must be used in the
specified concentrations.
• We recommend (damp) wipe cleaning. When selecting cleaning
agents, ensure that the agents chosen are mild (gentle to skin and
surfaces) and environmentally friendly. A standard household
cleaner can generally be used.
• Ensure that no liquid residues remain on any parts of the bed after
cleaning or disinfection. Otherwise the surfaces in these areas
may become damaged in the long term.
• If, despite its excellent mechanical resistance, the coated surface
is damaged by scratches or marks that permeate the entire
coating, the affected areas should be resealed using a suitable
repair substance to prevent moisture from penetrating. For further
information, consult STIEGELMEYER or a specialist dealer of your
choice.
• Disinfectants based on compounds that could potentially release
chlorine may be corrosive for metals, synthetics, rubbers and other
materials over longer contact periods or when concentrations are
too high. Use these agents sparingly and only if expressly
required.
For disinfection by wiping, most cleaning and disinfection agents usually used in
hospitals or care facilities can be used, such as cold and hot water, detergents,
alkaline solutions and alcohols.
To Next Page
Loading...
