burmeier Lenus - Under Bed Light

Instruction Manual for Lenus Care Bed
Page 46
4.5.2 Under bed light*
The energy-saving, long-lasting LED under bed light provides safe orientation during the
night and can reduce the risk of falls. The light is sufficiently subtle, however, to not
disturb the resident of the adjacent bed.
Similar to illustration!
Switching the under bed light on/off
The light goes on automatically if the bed is connected to the mains power supply.
To switch the light on or off manually, press the Sleep position button and the Sitting
position button at the same time and keep them pressed for approximately 1 second.
Please note: if the buttons are locked, then manual switching of the under bed
light is also locked.
For information on installation, please refer to the accessory instructions
provided.