190
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
*<d> stands for Program.
* AE stands for Auto Exposure.
1
Set the Mode Dial to <d>.
2
Focus on the subject.
Look through the viewfinder and aim
the AF point over the subject. Then
press the shutter button halfway.
When focus is achieved, the focus
indicator <o> on the viewfinder’s
bottom right will light up (in One-Shot
AF mode).
The shutter speed and aperture will
be set automatically and displayed in
the viewfinder and on the LCD panel.
3
Check the display.
The standard exposure will be
obtained as long as the shutter speed
and aperture displays do not blink.
4
Take the picture.
Compose the shot and press the
shutter button completely.
d: Program AE
If a description of the shooting mode appears in step 1, press <0> to hide
it (p.62).
To Next Page
Loading...
