Custom Wireless Flash PhotographyN
236
Multiple Speedlite slave units can be fired as one flash unit or separated
into slave groups for shooting with flash ratio control.
The basic settings are shown below. By changing the [Firing group]
setting, you can shoot with various wireless flash setups with multiple
Speedlites.
Basic settings:
Flash mode : E-TTL II
E-TTL II meter. : Evaluative
Wireless func. :0
Channel : (Same as slave units)
[1All] Firing multiple slave Speedlites as one flash unit
Effective when you need a large flash
output. All the slave units will be
controlled to fire at the same output and
obtain a standard exposure.
No matter which firing group (A, B, or C)
the slave units belong to, they will all fire
as one group.
1
Set [Firing group] to [1All].
2
Take the picture.
Fully Automatic Shooting with Multiple External Speedlites
To Next Page
Loading...
