239
Custom Wireless Flash PhotographyN
When [Flash mode] is set to [E-TTL II], flash exposure compensation
can be set. The flash exposure compensation settings (see below) that
can be set vary depending on the [Wireless func.] and [Firing group]
settings.
[Flash exposure comp.]
The set amount of flash exposure
compensation will be applied to the
built-in flash and all the external
Speedlites.
[2exp. comp.]
Flash exposure compensation is
applied only to the built-in flash.
[1exp. comp.]
The set amount of flash exposure
compensation will be applied to all
the external Speedlites.
If [Flash mode] is set to [E-TTL II], you can press the <A> button to
perform FE lock.
Flash Exposure Compensation
FE lock
To Next Page
Loading...
