347
x Searching for Images Quickly
In the single-image display, you can turn the <6> dial to jump through
the images forward or backward according to the jump method set.
1
Select [Image jump w/6].
Under the [x2] tab, select [Image
jump w/6], then press <0>.
2
Select the jump method.
Turn the <5> dial to select the jump
method, then press <0>.
d: Display images one by one
e: Jump 10 images
r: Jump images by the specified
number
g: Display by date
h: Display by folder
i: Display movies only
j: Display stills only
s: Display protected images only
k: Display by image rating (p.353)
Turn the <6> dial to select.
I Jumping through Images (Jump Display)
With [Jump images by the specified number], you can turn the <6>
dial to select the number of images you want to jump (1 to 100).
To search images by shooting date, select [Date].
To search images by folder, select [Folder].
If the card contains both movies and still photos, select [Movies] or
[Stills] to display one or the other.
If no images match the selected [Rating], you cannot browse through the
images with the <6> dial.
To Next Page
Loading...
