Chapter 3
3-2
10) Pack the printer into the packing box, and then put the roll media, ink tank and stand in another packing box for moving.
Use the original packing material for the printer and stand. If it is not available, pack them with a sufficient amount of cushioning materials.
3. Manual capping
When transporting the printer, cap the Printhead to protect the nozzles from drying out and to keep them clean. Follow the procedures described below:
1) While referring to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Opening the caps and releasing the carriage lock pins,
open all of the caps.
2) Move the carriage to the home position.
3) While referring to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Opening the caps and releasing the carriage lock pins.
Manual capping is an emergency measure when the printer does not operate. Manual capping can damage the printhead.
To Next Page
Loading...
