Chapter 1
1-5
1.2.7 Stand
0023-5227
iPF650 / iPF655
It is a stand [1] that puts the printer. Equipped with casters so that the printer can be easily moved. The output stacker [2] included with stand can use by the two
ways of the regular position or extended position.
F-1-9
MEMO:
- When delivering the printing to the output stacker: Use the position [A].
- When not using the output stacker or moving the printer: Use the position [B]. When moving the printer, raise the auxiliary rod to the position of extended position.
F-1-10
- Use the output stacker in the regular position. However, for the specified media, it can also be used in the extended position. The media can be removed more
easily when the output stacker is in the extended position. When moving the printer, changing the auxiliary rod to the position of extended position.
- The output stacker can accommodate one sheet. Remove each sheet before printing if you are printing a series of documents.
[Regular position]
F-1-11
[1]
[2]
[A]
[B]
To Next Page
Loading...
Need help?
General